FlightLine RC F7F-3 Tigercat 1600mm Wingspan PNP Rc Airplane
FlightLine RC F7F-3 Tigercat 1600mm Wingspan PNP Rc Airplane
1,6 Channel Radio.
2,TWO 4 Cell 14.8V 3000mAh LiPo batteries with XT60 Connectors
3, 6 Channel Receiver
Note:
If your shipment is delivered to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp
This Products is available in stock.
This Product is available in stock.
This Product is available in stock.
we will ship the package within 48 hours after the buyers pay money by paypal.
the FlightLine RC F7F-3 Tigercat exhibits fantastic stability, is very easy to control at a wide speed range, and has a predictable stall with easy recovery. We designed this aircraft to be a superb balance between top speed, vertical performance, flight duration, convenient transport, sport scale realism, and overall scale presentation. This is our 15th FlightLine RC warbird and it continues to innovate and raise the value bar for its owners. Own your model of the first mass production foam electric F7F-3 Tigercat in the world, and set yourself apart at your flying field today
Freewing Model designed to incorporate EPO foam, wood, plastic, and carbon reinforcements, our design is easy to assemble and maintain, and delivers the strength and power to satisfy any RC airplane pilot. The main wing halves, horizontal stabilizer, and two engine nacelles each install with four screws. A new pliable ribbon wiring harness simplifies each wing connection to one instead of five, so the wing can be attached in less than one minute. The antenna and gun barrels are also designed to easily slide out to prevent damage during transport. A plastic nose cone, cowls, and doors are designed for longevity.
The generously sized battery bay can accommodate your batteries, receiver, and optional gyro in a cleanly organized layout. The full coverage plastic cabin doors are spring-hinged for simple and reliable operation and plastic radial engine details add realism to your model. To ensure a secure fit, the cockpit of this FlightLine RC F7F-3 Tigercat is held on by both magnets and a sliding latch.
The FlightLine RC F7F-3 Tigercat arrives with dependable electronics pre-installed, and every servo in the aircraft is a Digital Metal Gear servo. The aircraft uses our DayBright 3W LEDs for visibility. Static wingtip lights remain on, and the single landing light turns on only when the landing gear is down, for ultimate realism like the full scale aircraft.
As with other FlightLine RC warbirds, the F7F-3 Tigercat arrives expertly painted and ready to customize. Three tone painted engine detail sets the stage for a modeling detailer's delight! Four sets of adhesive vinyl decals are also included in the box. Choose from these decals or recreate your own historic livery as you wish!
FEATURES:
Scale profile, accurate wing dihedral, and precisely modeled overall aircraft proportions
Removable wings for easy transport
Scale three blade propeller achieves 78 mph and scale plus thrust
Four different decal sets included inside the box for you to choose from
Day-bright LEDs and accurately actuating landing gear light
Large cabin space for easy placement of the batteries and radio equipment
Durable electric retractable landing gear with metal trunnions and 4mm steel wire struts
Tall foam rubber wheels for optimal handling on paved surfaces and short grass fields
INCLUDES:
FlightLine RC F7F Tigercat 1600mm (63 inch) Wingspan - PNP
Motor, ESC, servos, lights and retracts pre-installed
REQUIRES:
6 Channel Radio - Select a minimum 6 channel radio
6 Channel Receiver - Select a minimum 6 channel receiver
TWO 4 Cell 14.8V 3000mAh LiPo batteries with XT60 Connectors-We recommend 2 of the Admiral 4 Cell 3000mAh LiPos
4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger
PRODUCT SPECIFICATIONS:
Wingspan |
1600mm / 63in |
Length |
1400mm / 55in |
Weight (w/o battery) |
3200g / 113oz |
| CG (Center of Gravity) | 65-73mm from the leading edge of the wing at the root |
Power System |
3748-600Kv Brushless Outrunner Motor (Stock scale power system) |
Electronic Speed Control |
Two 60A Brushless ESCs with XT60 connectors |
Propeller / EDF |
12x7 3 Blade Propeller / 12x8 2 Blade Propeller High Performance Version (optional) |
Servos |
9g Digital Metal Gear Standard with 550mm lead: Left Aileron, Right Aileron |
| Landing Gear | Electric retracts with metal trunions |
Required Battery |
Two 4 Cell 14.8v 3000mAh batteries with XT60 connectors |
Required Radio |
6 Channel 2.4GHz |
| Ailerons | Yes |
Elevator |
Yes |
| Rudder | Yes |
Flaps |
Yes |
Lights |
Yes |
Hinge Type |
Nylon hinges on all surfaces |
| Material | EPO Foam |
| Skill Level | Intermediate |
| Build Time | 2-3 Hours |
| Recommended Environment | Outdoor, minimum 200 foot runway |
